The design features a new bag-to-conveyor interface comprised of two sections, the uppermost of which contains a SPOUT-LOCK® clamp ring positioned atop a pneumatically actuated TELE-TUBE® telescoping tube, allowing dust-tight connections between the bag spout and hopper, as well as automatic tensioning of the bag as it empties to promote flow and evacuation.
The lower section is comprised of a small surge hopper that directs material into a pneumatic pick-up adapter with four conveying line connections.
The telescoping tube raises the clamp ring assembly that seals the clean side of the bag spout to the clean side of the telescoping tube, then lowers until the bag spout is pulled taut. Once the spout is untied, the telescoping assembly exerts continual downward tension on the spout, elongating the bag as it empties.
The dust-tight system is vented to an optional BAG-VAC® dust collection device that collapses empty bags prior to retying and disconnection, eliminating dust emitted during manual flattening of empty bags.
An optional POWER-CINCHER® pneumatically actuated flow control valve allows retying of partially empty bags. Unlike devices using opposing bars to pinch the spout from two sides, the Flexicon design employs a series of curved, articulated stainless steel rods to cinch the spout concentrically on a horizontal axis for easy tie offs, and vertically in a tight zigzag pattern to prevent leakage of fine powders.The discharger is also equipped with optional FLOW-FLEXER® bag activators that raise and lower opposite bottom edges of the bag at timed intervals, loosening compacted materials and promoting material flow into the bag
BFF Series dischargers are characterized by top-mounted receiving cups and removable bag-lifting frames for forklift loading of bulk bags at low cost. Also offered are BFC Series dischargers having a cantilevered I-beam with electric hoist and trolley to raise and position bulk bags without the aid of a forklift. Both Series of dischargers are fitted as standard with patented Z-CLIPTM strap holders* for rapid, secure insertion and removal of bag straps, and are available with integrated scale systems for loss-of-weight batching directly from bulk bags.
This new generation discharger overcomes limitations inherent with conventional designs, and is based on advances that are patented or patent pending.
Construction is of carbon steel with durable industrial finish, or stainless steel finished to industrial food, dairy or pharmaceutical standards.
TELE-TUBE® telescoping tube
Dust-free Bulk Bag Discharger for Pneumatic Conveying Systems